=============================================================================
                    BTSRC213G1-2012L BMC Release History                    
=============================================================================
=============================================================================
* BMC Releae Date            : 2021-06-07
* BMC Version                : 0.07.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. N/A

[Know Issue]
  1. N/A

[Fixed Issue]
N/A

[Modification and new feature implementation]
  1. 优化phy led配置.
  2. 优化raid Temp温度检测.
  3. 更新fan table.

[Other]
  1. The file "BTSRC213G1-2012L_BMC_v0.06.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.06.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.
  4. The default static IP of share nic port is 192.168.3.100.
  5. Execute the command "ipmitool fru write 0 BTSRC213G1-2012L_FRU_v0.1.bin" to program the BMC FRU.

=============================================================================
* BMC Releae Date            : 2021-04-20
* BMC Version                : 0.06.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. N/A

[Know Issue]
  1. N/A

[Fixed Issue]
  1. Can't use IPMI command to get SEL information after clear SEL.
  2. "PSU1_Status"/"PSU2_Status" didn't displays "Presence detected" when unplug power cord.
  3. 信创-Bug7: BMC web无法删除管理员用户
  4. EVT-Bug45: 相同版本BIOS FW无法上传
  5. PreDVT-Bug4: event log刷满删除后出现额外的LOG
  6. PreDVT-Bug11: 硬件状态异常，CPU1&CPU2的DIMM8的在位状态均显示有误
  7. PreDVT-Bug17: sel中的error log无详细描述

[Modification and new feature implementation]
  1. Remove "PSU_Module" sensor.
  2. Remove "LED Control" of web dashboard.
  3. Displays PSU firmware version on web.
  4. Trigger "Configuration error" SEL when model/manufacturer of system PSU is not match.
  5. Trigger "Bmc_Boot_Power_Up"/"Bmc_Boot_Reset_Up" SEL after BMC initialization.
  6. Support IPMI "Get System Restart Cause" Command.
  7. Support IPMI watchdog command.
  8. Support BMC WDT2 function.
  9. Add log to audit log when system power on/off
 10. Blinking the UID when SSH/KVM/VMedia in use.
 11. Sync RTC clock when NTP is not working. 
 12. Add OEM command to enable/disable SSH.
 13. Auto redirect HTTP to HTTPS for web service.
 14. Add new web page to display discrete sensor state.
 15. Send hostname to DHCP server when get DHCP.
 16. Display "BIOS Upgrading" in KVM screen when updating BIOS via BMC.
 17. Add new web page to control PSU redundant mode.

[Other]
  1. The file "BTSRC213G1-2012L_BMC_v0.06.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.06.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.
  4. The default static IP of share nic port is 192.168.3.100.
  5. Execute the command "ipmitool fru write 0 BTSRC213G1-2012L_FRU_v0.1.bin" to program the BMC FRU.

=============================================================================
* BMC Releae Date            : 2021-02-26
* BMC Version                : 0.05.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. This version doesn't be verified on Pre-DVT MB.

[Know Issue]
  1. "PSU1_Status"/"PSU2_Status" didn't displays "Presence detected" when unplug power cord.
  2. "PSU_Module" is incorrect now.
  3. There is only MAC1 will be displayed in OCP information.
  4. Can't use IPMI command to get SEL information after clear SEL.

[Fixed Issue]
  1. Fix "Inlet Temp" and "Outlet Temp" sensor.
  2. When change BMC IP to DHCP, the IP mode will be restored to static after reboot BMC
  3. Bug:49 BMC web sensor中显示信息问题
  4. Change I2C sensor bus of CPU to 5.(for pre-DVT MB)
  5. Change I2C sensor bus of NCT7802 to 5.(for pre-DVT MB)
.
[Modification and new feature implementation]
  1. Add PSU1_FAN/PSU2_FAN sensor.
  2. Support "System Boot Options" function.
  3. Support BIOS load default by IPMI command.

[Other]
  1. The file "BTSRC213G1-2012L_BMC_v0.05.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.05.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.
  4. The default static IP of share nic port is 192.168.3.100.
  5. Execute the command "ipmitool fru write 0 BTSRC213G1-2012L_FRU_v0.1.bin" to program the BMC FRU.


=============================================================================
* BMC Releae Date            : 2021-02-05
* BMC Version                : 0.04.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. N/A

[Know Issue]
  1. "Inlet Temp", "Outlet Temp", "PSU1_Status", "PSU2_Status" and "PSU_Module" are not available now.
  2. There is only MAC1 will be displayed in OCP information.

[Fixed Issue]
  1. Bug46: BIOS FW上传后无法激活
  2. Bug47: Event log 超上限
  3. Web can't load user list
  4. Sometimes CPU/Memory temperature can't be displayed in BMC

[Modification and new feature implementation]
  1. Remove CPU1_FAN/CPU2_FAN sensor
  2. Change I2C sensor bus of CPU from 7 to 5.(for pre-DVT MB)
  3. Change I2C sensor bus of NCT7802 from 9 to 5.(for pre-DVT MB)
  4. Support NIC inventory function.

[Other]
  1. The file "BTSRC213G1-2012L_BMC_v0.04.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.04.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.
  4. The default static IP of share nic port is 192.168.3.100.
  5. Execute the command "ipmitool fru write 0 BTSRC213G1-2012L_FRU_v0.1.bin" to program the BMC FRU.


=============================================================================
* BMC Releae Date            : 2021-01-22
* BMC Version                : 0.03.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. N/A

[Know Issue]
  1. "Inlet Temp", "Outlet Temp", "PSU1_Status", "PSU2_Status" and "PSU_Module" are not available now.
  2. CPU2 inventory info will not be displayed. 

[Fixed Issue]
  1. N/A

[Modification and new feature implementation]
  1. Change the web default timeout from 60 mins to 15 mins.
  2. Support CPU inventory function.
  3. Support Memory inventory function.
  4. Support PCIe inventory function.
  5. Modify the command "ipmitool power reset" behavior(trigger a low-pulse signal to GPIOD3).

[Other]
  1. The file "BTSRC213G1-2012L_BMC_v0.03.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.03.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.
  4. The default static IP of share nic port is 192.168.3.100.
  5. Execute the command "ipmitool fru write 0 BTSRC213G1-2012L_FRU_v0.1.bin" to program the BMC FRU.


=============================================================================
* BMC Releae Date            : 2021-01-08
* BMC Version                : 0.02.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. N/A

[Know Issue]
  1. "Outlet Temp", "PSU1_Status", "PSU2_Status" and "PSU_Module" are not available now.

[Fixed Issue]
  1. Bug7: can't use UUID LED
  2. Bug32: KVM运行时显示异常
  3. Bug35: BIOS中设置新的的IPMI IP后 192.168.2.100仍能使用
  4. Bug36: OS reboot 有时不记录event log

[Modification and new feature implementation]
  1. Support FRU read/write function
  2. Add CPU temp sensor 
  3. Add memory temp sensor
  4. Add Inlet temp sensor
  5. Add PEX temp sensor
  6. Add fault LED function

[Other]
  1. The file "BTSRC213G1-2012L_BMC_v0.02.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.02.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.
  4. The default static IP of share nic port is 192.168.3.100.


=============================================================================
* BMC Releae Date            : 2020-12-18
* BMC Version                : 0.01.00 
* CRB (code base version)    : N/A
* Option Rom                 : N/A
* Flash Size                 : 32MB
=============================================================================
[Highlight]
  1. The file "BTSRC213G1-2012L_BMC_v0.01.00.mtd" is used for offline flash.
  2. The file "BTSRC213G1-2012L_BMC_v0.01.00.tar" is used for online update.
  3. The default static IP of dedicated port is 192.168.2.100.

[Know Issue]
  1. Some sensors are not available.
  2. Bug7: can't use UUID LED 

[Fixed Issue]
  1. N/A

[Modification and new feature implementation]
  1. Support chassis control command(power off, power on, power cycle, power reset).
  2. Add board sensors.
  3. Change PWM default output to 100%.
  4. Add remote BIOS update function.

[Other]
  1. N/A

